ON AIRTuning in…NEXT …Radio page

How to Build Game Volume Settings: Separate BGM, Sound Effects and Voice Sliders (Plus Good Default Values)

2026/11/20 · Game development · about 7 min to read · by jeid (Otomusu site owner)

Volume Settings Are Not a “Feature to Add Later”

When you’re making a game, it’s easy to tune the BGM and sound effects until they sound “just right” in your own setup and call it done. But the people who play your game use completely different setups: earbuds, a phone speaker, the built-in speakers of a big monitor, or they might be streaming while they play.

A volume that’s perfect for you can easily become “the BGM is so loud I can’t hear the dialogue” or “the sound effects are too quiet and the game feels flat” for someone else. That’s where volume settings come in. It isn’t a difficult feature, and simply deciding the following three things will make your game much more comfortable to play:

  • How many types of sound to separate
  • How the slider should behave
  • What the default values should be

This column walks through each of them in order, keeping things realistic for solo-developed games.

First, Split Your Sounds into Groups

The most important thing in volume settings is to organize your sounds into groups (a mechanism often called buses or channels). Many game development tools have a feature that lets you group sounds by type and change their volume together. The feature name differs from tool to tool, so check the official documentation for yours.

For a small game, three or four groups are plenty.

Group What goes in it Why separate it
BGM Scene music, title music It plays for a long time, so preferences vary a lot
Sound effects Confirm sounds, attack sounds, item pickup sounds Directly tied to how responsive the controls feel
Voice Character dialogue, narration If it can’t be heard, the content doesn’t come across
Ambient sounds (optional) Wind, rain, city bustle Used for atmosphere. Many people find it distracting

You could provide just one “master volume” slider, but that can’t satisfy the most common request: “I just want to turn the BGM down.” At the very least, I recommend keeping BGM and sound effects separate.

Sliders Feel More Natural When They Aren’t Linear

This is a point that’s surprisingly easy to overlook. If you build the volume slider in the simplest way, so that 0–100% changes the loudness (amplitude) in direct proportion, it tends to feel like this:

  • Moving the upper part of the slider doesn’t seem to change much
  • Moving the lower part just a little makes the sound suddenly seem to vanish

This happens because human hearing perceives loudness logarithmically. Loudness is expressed in decibels (dB), and the conversion from an amplitude ratio is “dB = 20 × log10(amplitude ratio).” For example, halving the amplitude is about −6 dB, and 1/10 of the amplitude is −20 dB. As a general rule of thumb, a sound seems “half as loud” at around −10 dB, though this varies by person and frequency.

So instead of using the slider value as-is, you can bend it a little.

Slider position Volume if used as-is Volume if squared
100% 0 dB (reference) 0 dB (reference)
50% About −6 dB About −12 dB
25% About −12 dB About −24 dB
10% −20 dB −40 dB

Simply “squaring the slider value before using it as the volume” makes adjustments at the quiet end much smoother. If you don’t want to work through the math, just remember: pass the squared slider value. Some tools let you specify volume directly in dB. In that case, it’s safer to treat the bottom of the slider (0%) as a separate “mute” state.

Default Values: Don’t Set Everything to 100%

Another common mistake is setting every default to 100%. If you start at maximum volume, players can only turn things down. And if the BGM and sound effects are the same loudness, the effects get buried under the BGM, or the BGM feels too loud.

These are only rough guidelines, but thinking about your starting settings like this makes balancing easier:

  • BGM: around 60–70%. It should play as background, not the star of the show
  • Sound effects: around 80%. Loud enough to convey how responsive the controls are
  • Voice: 100%. Being able to hear it comes first
  • Ambient sounds: around 40–50%. Quiet enough that you only notice it after a while

These numbers “depend on the content of your game.” A quiet, conversation-driven game might lower the BGM even further, while an action game might raise it slightly for momentum. What matters is to treat the defaults as “the first thing players hear” and to place them a little below maximum. If the volume of your source assets is inconsistent, adjusting becomes difficult, so before putting them into your game, level out your Sound Effects and instrumental BGM to roughly the same loudness.

Features to Include on the Settings Screen, and Where to Put It

Besides the volume sliders, there are other features that help. Here they are in order of priority:

  1. Separate sliders for BGM and sound effects
  2. Saving the settings (so they’re the same the next time the game starts)
  3. Being able to hear the change while the settings screen is open (play a short sound each time the slider moves)
  4. Separate sliders for voice and ambient sounds
  5. A mute button that silences everything

Number 3 is especially recommended. When the sound effects slider moves, playing a short confirmation sound (such as a confirm sound) lets players check the volume with their own ears. For the BGM slider, it’s enough if the current track simply keeps playing so they can hear it.

Make sure the settings screen can be opened from both the title screen and the in-game menu. If players notice “the BGM is too loud” after starting the game and have to go back to the title screen to change it, that’s frustrating.

Common Mistakes

  • Not saving settings: Everything resets to the defaults at every launch, so players have to adjust each time
  • Some sounds still play when muted: A sound effect that you forgot to put into a group ignores the settings
  • Only the title screen is loud: Volume is set directly per scene and has drifted away from the settings
  • Voice gets buried by sound effects: Battle sounds overlap with dialogue and make it hard to hear (it helps to lower sound effects slightly while dialogue is playing)
  • Asset volumes are inconsistent: One sound effect is extremely loud, and turning it down in the settings makes everything else too quiet

The last one in particular can’t be fixed with a slider. The fundamental solution is to level out the loudness of your assets when you bring them in.

A Pre-Release Test Routine (Takes About 10 Minutes)

  1. Listen to the same game in three setups: earbuds, speakers, and a phone (or a laptop’s built-in speakers)
  2. With the default settings, play from the title screen through to the first battle (or the first big moment)
  3. Note any sounds that are hard to hear or too loud, and fix the volume of the assets in that group
  4. Set all sliders to 0% and check that it’s truly silent
  5. Set all sliders to 100% and check that the sound doesn’t crack or distort
  6. Change the settings, quit, restart, and check that the settings were kept
  7. Have someone other than yourself, such as family or a friend, play it once and see whether they comment on the sound

Number 7 is especially effective. As the creator, you’ve heard the BGM and sound effects dozens of times, so your ears have grown used to them. The reaction of someone hearing it for the first time is the most honest feedback you’ll get.

Summary

  • Separate sound into groups, at minimum BGM and sound effects, so each can be adjusted independently
  • Squaring the slider value before using it makes adjustments at the quiet end smoother
  • Don’t set every default to 100%. Try starting around 60–70% for BGM, 80% for sound effects, and 100% for voice
  • Save the settings, and make them accessible from both the title screen and the in-game menu
  • Before release, listen in three setups, and also check three cases: everything at 0%, everything at 100%, and after a restart

Volume settings are a small feature, but they’re a place where consideration for your players takes tangible form. If you’d like to learn more about choosing and managing assets for your game, please also see the Columns list.

Terms of use for the assets

  • Free
  • No registration
  • Commercial use OK
  • Edits OK
  • Credit optional
  • No usage report needed

See the terms of use for details.

Related articles

Waiting to play
0:00 / 0:00