ON AIRTuning in…NEXT …Radio page

Audio EditorCut and paste, harmonic adjustment, noise reduction and part separation with the waveform and spectrogram

that shows the sound's waveform and, in color, the strength at each frequencyspectrogramA free audio editing tool that lets you edit while looking at the waveform and the spectrogram.erase only specific frequencies, adjust the size of harmonics, remove noise, and split a song into parts such as vocalsYou can do this. Audio is never sent to a server; it is processed only inside your browser.

1. Load audio

The editor opens once you load audio.

Hint: press "Try with a test tone" first to see how the buttons work.

What you can do

  • Waveform and spectrogram:Select ranges while viewing the level (waveform) and the strength at each frequency (color) at the same time. Zoom with the wheel, select by dragging, and move the view with the "whole waveform" strip.
  • Frequency editing:Select a time × frequency range with "Rectangle" and erase, lower, raise or repair that sound, or keep only the band.
  • Harmonic adjustment:Decide the fundamental and raise or lower each of the 2nd to 16th harmonics. Presets such as odd-only or fundamental-only are included, plus an exciter that adds harmonics.
  • Noise reduction:Removes broadband noise (hiss), hum noise (buzz) and clicks (pops).
  • Part separation:Split into vocals, drums, bass and other; the center sounds (karaoke); rhythm and melody; or by range, then compare and save (signal-processing separation).
  • Basic editing:Cut, copy, paste, delete, silence, fade, volume, normalize, reverse, phase invert, and speed/pitch change. Everything can be undone.

Tips

  • When you want to erase just one sound:Zoom in on where the sound appears on the spectrogram, surround it with the rectangle and press "Erase the sound in the range". If the edges bother you, surround it a little more widely.
  • When you want to change the tone of a voice or instrument:With the "Harmonics" tool, click the height of a horizontal line (harmonic) on the spectrogram to set the fundamental, then adjust with the sliders. Listen with "Preview" before applying.
  • When removing noise:If you apply it too strongly, the sound becomes muddy like underwater. Start with an "Amount to remove" of about 12–18 dB.
  • When you want to extract vocals:With a stereo song, "Vocal extraction" brings out the sounds in the center. Drums and bass are also in the center, so they can leak in. "Simple 4 parts" removes percussion and low sounds first.

FAQ

Is the audio file sent to a server?

No. The audio you load is processed only inside your browser. Heavy processing also runs in a separate thread (a worker) inside the browser, so the screen is less likely to freeze.

Can I erase only a specific frequency on the spectrogram?

Yes. With the "Rectangle" tool, select a "time × frequency" rectangle on the spectrogram and press "Erase" in the "Frequency / Spectrum" tab. You can also raise or lower the volume instead. The edges of the range blend smoothly, so pops are unlikely.

What can harmonic adjustment do?

You can raise or lower the volume of each harmonic (2×, 3× … 16×), the integer multiples of the fundamental frequency (e.g. 220 Hz). You can keep only odd harmonics, keep only the fundamental, make the sound brighter or rounder, and so on. The fundamental can be set by clicking or detected automatically.

How do I reduce noise?

Select a part that contains only noise (such as a silent part), press "Use selection as noise sample", then press "Apply". If you have no sample, one can be made automatically from the quietest part. Hum noise (50 Hz / 60 Hz) and clicks/pops can also be removed with their own buttons.

Can I extract vocals from a song or split it into parts?

Yes. Note that this is signal-processing separation, not AI separation. You can extract sounds panned to the center of a stereo mix (such as vocals), separate percussion from melody, make a simple 4-part split (bass, drums, vocals, other), or split by frequency range. Depending on the song, the parts may not separate cleanly and some other sounds may leak in.

What formats can I save in?

You can save as WAV (16-bit, 24-bit or 32-bit float) or MP3 (128–320 kbps). You can save the whole file or only the selected range. Separated parts can be saved one by one as WAV.

Does it work with long songs?

Songs of a few minutes work fine. Audio longer than about 10 minutes takes a long time to process and uses a lot of browser memory. Heavy processing shows its progress and can be cancelled midway.

Can I undo?

Yes. Every edit — cut, frequency edit, noise reduction and so on — can be undone and redone (Ctrl+Z / Ctrl+Y).

Audio made by processing Otomusu tracks can also be used within Otomusu's Terms of use range. If you separate and use someone else's song or vocals, please check the rights holder's permission and terms of use.

  • Free
  • No registration
  • Commercial use OK
  • Editing OK
  • Credit is optional
  • No usage report needed

Exporting to MP3 takes lamejs (LGPL) is used.

Waiting to play
0:00 / 0:00