ON AIRTuning in…NEXT …Radio page

3D ModelingMake your own 3D models in the browser (free)

No installation or registration needed, 3D modeling tool that works in your browser. You can combine cubes, spheres and cylinders, and also use Edit Mode to select points and faces and shape the model in detail.sculpting, boolean, UV unwrapping, textures, bones, animation and movies are also supported, and sample models such as a human, cat, dog, car, house and field are included. The controls work like full-featured 3D software: rotate the view with the middle button and move with G, R and S. What you make can be exported as GLB, OBJ, STL, PNG, video and GIF, and Your work is processed only and never sent to a server. If you are unsure, see the manual and tutorials under "? Help".

Middle-button drag: rotate the view / Shift+middle button: pan / wheel: zoom. Click to select and move with G, R, S.

Keys: G move / R rotate / S scale (X Y Z lock the axis) / Tab Edit Mode / E extrude / Shift+A add / Shift+D duplicate / X delete / A select all / I insert key / Space play / Ctrl+Z undo / Ctrl+S save. See Help for details.

Add

Basic shapes

Shapes

Objects

Nature

Lights, camera and bones

Increasing the cube divisions makes it easier to shape fine details in Edit Mode and Sculpt Mode.

Samples

Samples with bones, and the solar system, come with animation. After loading, press ▶ Play. Use Motion pattern to switch to walking, running, dancing and more.

Outliner (list of objects)

    Selected object

    Position
    Rotation (degrees)
    Size

    Object actions

    Color, material and texture

    Click a shape to change its color or pattern.

    Texture (apply pictures and patterns)

    Boolean (join and cut shapes)

    Select two shapes and then press (the first one selected is A, the second is B).

    Shaping (Edit and Sculpt)

    Select one shape, then press a button below or Edit / Sculpt above (the Tab key also enters Edit Mode).

    Edit Mode (points, edges, faces)

    Shaping tools (also in the left toolbar)

    Other

    Move the selected points and faces with G, R, S or the arrows, rings and squares. For "Extrude faces", select faces with "Select faces" and then press it (a negative length makes a dent). With the E key you can set the length with the mouse. After Inset or Bevel, change the amount in the Adjust panel at the lower left. For Loop cut, hover over an edge and click (the count and position can be changed at the lower left).

    Sculpt (like clay)

    Choose the brush in the toolbar on the left of the screen.

    Dragging changes the shape. Hold Ctrl for the opposite direction (dent). With few faces it is rough, so use Smooth subdivide first to make them finer.

    UV unwrap (preparing for textures)

    Drag on the picture to shift, wheel to scale. In Edit Mode, select faces to edit only those faces.

    Bones and posing

    1. Make a skeleton (select it and press Tab). 2. Select shapes and press Bind. 3. Rotate bones with Pose above (R key). 4. Press I to insert keys.

    View & scene

    Movie (turn animation into video)

    Films the animation made with keyframes from start to end. WebM takes about as long as the video itself.

    Save

    Images are exported from the angle shown in the frame. JPEG cannot be transparent.

    3D Modeling Help

    Manual contents

    1. Screen layout

    The large frame in the center is the 3D view, where you build shapes. The timeline under it is where you add motion (animation).

    The top bar has the mode buttons (Object, Edit, Sculpt, Pose), the move / rotate / scale tools, undo, view buttons and Help.

    Below (on the right on a computer) is the settings panel. Use the tabs at its left edge to switch between the Create, Object, Material, Edit, UV, Bones, Scene and Save pages.

    There are four modes. Object Mode moves whole objects. Edit Mode changes the shape by moving points, edges and faces. Sculpt Mode builds up or carves the shape like clay. Pose Mode rotates bones to pose a character.

    On the left side of the 3D view is the toolbar. It shows only the tools that fit the current mode (Object, Edit, Sculpt). Select, Move, Rotate and Scale are always there.

    In the settings panel on the right (below on phones), switch pages with the tabs lined up vertically at the left edge of the panel: Create, Object, Material, Edit, UV, Bones, Scene and Save. Changing the mode switches to the matching tab automatically. The New button at the top clears the current work and starts from scratch (you can undo it).

    In full screen on a phone, the settings panel starts closed so the 3D view is large. The Panel button shows or hides it (in landscape it appears on the right). The Animation button shows or hides the timeline.

    In Add in the Create tab, besides the basic shapes there are over 40 shapes such as star, heart, gear, arrow, stairs, arch and spring, vase, mug, wine glass and chess pawn, and rock, cloud, tree and mountain.

    2. Basic mouse and key controls

    • Rotate the view: hold the middle mouse button (press the wheel in) and move the mouse.
    • Pan the view: hold Shift and drag with the middle button. Dragging with the right button also pans.
    • Zoom: turn the wheel. You can also zoom by holding Ctrl and dragging with the middle button.
    • Without a middle button (laptops, etc.): hold Alt and drag with the left button to rotate the view. You can also drag the round buttons at the top right of the view (rotate, pan, zoom). On a phone: one finger rotates, two fingers pan and zoom.
    • Select: left-click. Shift+click (or Ctrl+click) adds or removes objects from the selection. Dragging on empty space selects everything inside the rectangle.
    • Number pad: 1 = front, 3 = side, 7 = top, 0 = angled, 5 = switch perspective / orthographic, 4, 6, 8, 2 = rotate in small steps, . (period) = focus on the selection.
    • Shift+A: opens the Add menu at the mouse position.

    3. Move, rotate and scale (G, R, S)

    Select an object, press G and move the mouse to move it. Click or press Enter to confirm, and Esc or right-click to cancel. R rotates and S scales.

    While moving, press X, Y or Z to move only along that axis (press again to release). You can also type numbers (for example G, X, 2, Enter moves it 2 units to the right).

    You can also drag the arrows, rings and squares (the gizmo). Switch with Move / Rotate / Scale above. Turn on Snap movement to move in fixed steps.

    Shift+D duplicates and lets you move the copy right away. X (or Delete) deletes, A selects all, Alt+A deselects, Ctrl+Z undoes and Ctrl+Shift+Z (or Ctrl+Y) redoes.

    In the Selected object panel you can type position, rotation and size. Origin to center, Place on floor, Apply scale to shape, Mirror duplicate and Join into one are also here.

    4. Edit Mode (points, edges, faces)

    • Extrude (E): select faces and press E to pull them out. Set the length with the mouse and click.
    • Delete (X): removes the selected points or faces.
    • Smooth subdivide: splits faces into smaller ones and smooths the whole shape. The face count becomes four times larger.
    • Split faces into four: makes the faces smaller without changing the shape. Use it when you want to shape fine details.
    • Blend points: moves the selected points (or all points) toward their neighbors to smooth them.
    • Merge points into one: joins the selected points at their center. Flip face direction: swaps the front and back of the selected faces.
    • Extrude (E): select faces and press it to pull them out. Move the mouse to set the length and click to confirm.
    • Inset (I): select faces and press it to create a slightly smaller face inside. Change the width in the adjustment panel at the lower left. Extrude afterwards for a recess or a bump with a rim.
    • Bevel (Ctrl+B): select edges and press it to chamfer the corners. Change the width and the segments (2 or more makes it round) in the adjustment panel. It works best when you select edges that meet at corners, or a whole ring of edges.
    • Loop cut (Ctrl+R): press the tool and hover over an edge to see the cut as a yellow line. Click to cut all the way around along the faces. Change the number and position in the adjustment panel. On phones, tap the same edge twice.
    • Knife (K): press the tool and drag a line across the screen. The shape is cut along a flat plane through that line. Turn off Cut front faces only to cut all the way through.

    Select a shape and press Tab to enter Edit Mode. Press Tab again to go back. 1 selects points, 2 selects edges and 3 selects faces.

    Click points, edges or faces to select them, and move them with G, R and S. Drag to select an area (the B key toggles Box select). Turn on See through (Alt+Z) to also select points on the back.

    The Smooth shading angle in the Selected object panel shades the places where the angle between faces is smaller than this value as smooth. At 0 every face looks flat.

    [Shaping tools] Use them from the toolbar on the left (in Edit Mode) or from the buttons in the Edit tab.

    5. UV unwrapping (preparing to apply textures)

    • Smart UV unwrap: groups faces that point in similar directions into islands and arranges them. Good for complex shapes.
    • Cube projection: projects from the six sides of a box. Good for buildings and boxes.
    • Cylinder and sphere projection wrap the UVs around a tube or ball. Planar projection (X, Y, Z) uses the view from that direction as it is.

    UVs describe where each part of a 3D surface sits when the surface is laid flat like paper. Textures (pictures and patterns) are applied along the UVs.

    Shapes you add already have UVs. If the pattern stretches after you change a shape with Boolean or Extrude, rebuild the UVs with the unwrap buttons in the UV panel.

    In Edit Mode, select faces first to unwrap only those faces. Drag on the UV picture to shift it and use the wheel to scale it. There are also rotate and flip buttons.

    6. Textures (applying pictures and patterns)

    • Patterns: checker, brick, wood, grass, stone, tile, water and more are built in.
    • Image file: use Load an image file to apply your own photo or picture (PNG, JPEG, WebP). Large images are shrunk automatically.
    • Color becomes the surface color. Bump makes bright areas look raised to give a rough feel. Transparency keeps bright areas and makes dark areas see-through (for leaves, etc.).
    • Repeat, shift and rotate: change how many times the pattern repeats, and its position and angle.

    Select a shape and, in Texture in the Material tab, choose where to apply it (color, bump, or transparency).

    When you apply a texture, the shape color is set to white so the pattern shows as it is. To tint the pattern, change the color afterwards.

    Patterns are grouped as Stone and ground, Wood cloth and materials, Metal and machines, Patterns and Planets, with over 50 kinds. Planet textures (Earth, Mars, Jupiter and more) turn a sphere into a celestial body when applied.

    7. Sculpt (shaping like clay)

    • Draw raises the surface. Inflate swells it along its direction. Smooth evens out bumps.
    • Pinch pulls the area toward the center. Flatten makes it flat. Grab picks up and pulls the area (it moves as far as you drag).
    • Size, Strength and Symmetry: change the brush size and strength. Turn on Symmetry (X) to apply the same change on the opposite side.

    Select a shape and press Sculpt above. Drag over the shape to change it with the brush. Hold Ctrl to work in the opposite direction (dent).

    With few faces the shape changes roughly. Run Smooth subdivide once or twice first to make the faces smaller.

    8. Boolean (joining and cutting shapes)

    • Union (A + B): joins the two into one shape.
    • Difference (A − B): cuts the shape of B out of A. Use it to make holes.
    • Intersection (A ∩ B): keeps only the part where the two overlap.

    Select two shapes (the first one you click is A and the second is B). Press a button in the Boolean panel.

    The result uses the material of A. Many faces make it slow (up to 12,000 faces in total).

    9. Bones and posing

    • Make a skeleton: add one bone with Skeleton in Add. Select the skeleton and press Tab to enter bone editing. Click a bone to select it, press E to connect a new bone at its tip, and move it with G, R and S. Human skeleton and Four-legged skeleton add ready-made bone sets.
    • Bind shapes: select the shapes to bind and press Bind with automatic weights. The movement is shared automatically so nearer bones move the shape more.
    • Pose: select the skeleton or a bound shape and press Pose above. Click a bone and rotate it with R. Reset pose returns to the original pose.

    Bones let you bend and move shapes like a person or an animal. The steps are: 1. make a skeleton, 2. bind shapes to the bones, 3. rotate the bones in Pose Mode.

    A shape bound to bones cannot be edited as it is. To edit it, use Unbind from bones, edit it, and bind it again.

    10. Animation (keyframes) and movies

    • Moving objects: select an object, choose a frame and press I (or Insert key). Change the frame, move the object and press I again.
    • Moving bones: in Pose Mode, select a bone, choose a frame, make the pose and press I. If no bone is selected, keys are set on all bones.
    • Timeline: move through frames with the slider and play with Play (Space key). You can change the number of frames and the frames per second (fps). A diamond marks a frame that has a key.
    • Interpolation: Smooth starts and stops slowly. Constant speed moves at the same speed throughout.
    • Camera: place a camera with Camera in Add. Select it and use View through the selected camera to see what will be filmed. Match camera to the current view aligns it with what you see now.
    • Movie: in the Movie panel choose the camera, size and format (WebM video, GIF animation or image sequence) and press Make movie. With Camera goes around once on, it films while circling the scene even without keys.

    Animation is made with keyframes. Record positions or poses at certain frames (moments) and the tool fills in the motion in between.

    A WebM video takes about as long to make as the video itself. A GIF becomes a large file if it is big or has many frames.

    11. Sample models

    From Samples in the Create tab you can load a human, cat, dog, car, house, field, tree and robot, as well as the solar system, rocket, airplane, fish, bird, dinosaur, room, castle, snowman, windmill and Ferris wheel. Those with bones, and the solar system, come with animation.

    After loading, play the animation, or select shapes and change their colors and textures. You can change everything freely.

    After loading a sample, the Motion pattern field appears. Choose a motion for that sample (walk, run, dance, jump, wag the tail, roar, flap, different orbit speeds and more) and press Insert this motion. Choosing the one marked (Default) returns to the motion it loaded with.

    12. Saving and exporting

    • Project file (.otm3d): saves all shapes, textures, bones and animation so you can continue later. Work in progress is saved automatically in this browser.
    • 3D models: export as GLB (for games and the web; bones and animation are included), OBJ and STL (for 3D printers).
    • Images: save as PNG (the background can be transparent), JPEG or WebP, from the angle you see now.
    • You can enter a file name, and in Chrome and Edge you can also choose where to save. Ctrl+S also saves.

    13. Troubleshooting

    • Cannot move or select a shape: check the mode. From Edit or Sculpt Mode, go back with the Object button above or the Esc key.
    • The screen is slow: reduce the number of faces (shown under the outliner). Avoid using Smooth subdivide too much.
    • The texture is stretched: redo the unwrap in the UV panel.
    • Want to undo: Ctrl+Z (or Undo above) goes back up to 40 steps.

    How to use

    1. From the Create tab on the right (below on phones), add cubes, spheres, cylinders and more. Click to select, then press G・R・S, move the mouse and click to confirm (the Move / Rotate / Size tools in the left toolbar also work). To start over, press New at the top.
    2. In the Material tab, change the color, gloss, metallic look and opacity, and apply textures (patterns or images).
    3. To refine a shape, select it and press Tab (Edit Mode). Select points or faces and move them, or use the left toolbar's Extrude, Inset, Bevel, Loop cut and Knife to shape it. To work like clay, go to Sculpt.
    4. Select two shapes and use Boolean to join them or cut one out of the other.
    5. For characters, make a skeleton, bind shapes to it and move it in Pose. Press I to insert keyframes and make animation.
    6. Turn it into a video with Movie, or press Save to export an image (PNG), a 3D model (GLB, OBJ, STL) or a project file.

    3D modeling tips

    • Make the big shapes (body, main part) first, then add small parts (eyes, buttons, handles) to keep the balance.
    • When you need two of the same shape, make one side and use "Mirror duplicate" so both sides match.
    • Before Edit Mode or Sculpt Mode, increase the cube divisions or use Smooth subdivide to make smooth curves easier.
    • "Smooth subdivide" makes four times as many faces. Once or twice is enough; too much makes it heavy.
    • For models where lightness matters, such as games, avoid adding too many faces (the triangle count is shown under the object list).
    • Before binding to bones, place the shape over the bones and check that it fits around them. It will then move cleanly.

    FAQ

    Can I do serious 3D modeling in just a browser?
    Yes. Add shapes such as cubes, spheres and cylinders and combine them by moving, rotating and scaling. In Edit Mode you can select points, edges and faces and refine shapes with extrude, inset, bevel, loop cut, knife, subdivide and smoothing. Sculpting (building up and carving like clay), booleans (joining and cutting), UV unwrapping, textures, bones and posing, keyframe animation and movie export are also supported.
    Do I need to install anything or sign up?
    No. Just open it in your browser. Models you make are processed only inside your browser and are never sent to a server.
    How do I use it?
    Hold the middle mouse button (press the wheel in) and move to rotate the view; hold Shift as well to pan. The wheel zooms. Left-click to select, and use G = move, R = rotate, S = scale (move the mouse, then click to confirm), Tab = Edit Mode, Shift+D = duplicate, X = delete. Without a middle button, hold Alt and drag with the left button, or use the round buttons at the top right of the view. See "? Help" above for details.
    Can I apply pictures or patterns (textures) to shapes?
    Yes. In Texture under Selected object, choose a pattern (checker, brick, wood, grass, stone, etc.) or your own image file. It can be used for color, bump and transparency. If the pattern stretches, rebuild it with UV unwrapping.
    Can I add bones and move a character?
    Yes. Make a skeleton and Bind shapes with automatic weights, then rotate the bones in Pose Mode to pose them. Insert keyframes to make animation such as walking, and turn it into a video (WebM) or GIF animation. There are also samples of a human, cat, dog and robot.
    Are there sample models?
    We provide a human, cat, dog, car, house, field, tree and robot. Load them from Samples in the Create tab. You can animate them as they are or rework them.
    What formats can I save in?
    You can save images (PNG, JPEG, WebP; PNG can have a transparent background), 3D models (GLB, OBJ, STL), video (WebM), GIF animation and project files (.otm3d). You can enter a file name, and in Chrome and Edge you can also choose where to save. Save a project file to continue later. Work in progress is saved automatically in this browser.
    Can I use my models in games or with a 3D printer?
    GLB works with game engines (Unity, Godot, etc.) and 3D on the web, OBJ with many 3D programs, and STL with 3D printers. GLB also includes bones and animation. For 3D printing, check before printing that the model's build (thickness, thin walls, etc.) is suitable.
    Can I open other 3D models?
    You can open GLB, glTF, OBJ and STL files, edit them, and export in another format. If you use a model made by someone else, follow that model's terms of use.
    Who owns the models I make?
    You own the rights to the models you make. Use them freely in games, videos, social media and more. You may also use the sample models freely.

    More free tools

    Waiting to play
    0:00 / 0:00